IKSUN logoCurtain Hardware

Electric curtain track range

Motorized curtain tracks: 38 profiles, four installation families

Choose by how the track is fixed and which motor it takes. Track bodies run from {massMin} to {massMax} kg per metre, so the profile you pick also decides your freight cost.

Selection

Which family fits your window

Four conditions cover most of what buyers ask us for. Pick the row that matches your site and the page will give you the section, the limits and the packing.

Motorized track selection guide
Site conditionFamilyWhy it fits
You want the light built into the curtain trackIntegrated motor and light trackThe AT81 pairs a 12 V light with the motor head, so one body lights and moves the drape.
You are building the track into a ceiling voidRecessed built-in trackThe recessed body sits flush and takes Somfy or Jialisi motors.
You want an LED strip in a square aluminium profileLED square trackThe WR510 carries the light in a 31 mm square section with a 6.7 m single run.
You need the widest choice of sectionsBelt-drive track profilesThe belt-drive range spans 38 profiles, all with published mass per metre.

Families

The range in detail

  • Integrated motor and light track

    One extrusion carries the belt drive and a built-in COB light strip, so no separate lighting channel is needed inside the curtain box.

    Buyer question:: Can I get curtain control and cove lighting from a single track without a second light channel?

    2025 Curtain Track Brochure, Electric Curtain Track Series (p.14)

  • Recessed built-in track

    Ceiling-pocket bodies made in two motor interfaces so the track is fully concealed when the curtain is open.

    Buyer question:: Will the track vanish into a plasterboard pocket and still take the motor brand I already stock?

    2025 Curtain Track Brochure, Built-in Electric page (p.15)

  • LED square track

    A square-profile track with a downward-facing light channel, specified by the metre with the full accessory set.

    Buyer question:: What section, lengths and carton quantity do I order for a lit square track?

    2025 Curtain Track Brochure, LED Light Curtain Track Series (p.17)

  • Belt-drive track profiles

    The full extrusion range that accepts a belt drive, quoted by mould number with the theoretical mass per metre published for every body so freight can be sized before the quotation arrives.

    Buyer question:: Which profile number do I specify, and what will the shipment weigh?

    Internal tooling catalogue, motorized track sheet, tooling department

Models

Product pages

What arrives in the carton

Standard bill of materials for one motorized track

The same configuration is issued across the motorized range. Quantities of sliding beads and drive belt follow the track length.

  • 1 motor
  • 1 remote controller
  • 1 pair of transmission boxes
  • 1 pair of carriers (sliding trolleys)
  • 1 internal splice strip
  • 2 stainless steel or plastic hooks
  • 2 stainless steel end locks
  • Ceiling brackets and second-layer brackets
  • N sliding beads to the track length
  • N metres of drive belt as a single run

These are typical bill-of-material lines for the motorized range. Exact contents vary by family and are confirmed on the quotation.

Key facts

The figures on this page, stated plainly

  • Of the 38 track bodies, 14 are produced for Jialisi drives, 8 for Somfy drives, and 16 are universal belt-drive profiles quoted without a motor.

    Source: Internal extrusion catalogue, drive family column

  • The IKSUN motorized range is organised into four families: an integrated motor-and-light track (AT81), a recessed built-in track, an LED square track (WR510) and the belt-drive profile range.

    Source: Product pages and the internal tooling catalogue

Get in touch

Tell us the window and we will name the profile

Send the opening width, the ceiling construction and the motor you use. We will come back with the profile number, the section and the mass per metre.

Request a quoteBrowse the profile table